The first step is to inspect the pavement for cracks and other damage that may need to be repaired. We use various techniques to identify cracks and other defects in the pavement so that we can apply just the right asphalt repair remedy. If that repair is crack sealing, then our experienced crew continues.

The next step is to prepare the cracks for sealing. This may involve cleaning the cracks with high-pressure air or water, removing any debris or vegetation from the cracks, and applying a primer or other preparation material to ensure that the sealant will adhere properly.

Once the cracks are prepared, the sealant is applied using a variety of techniques, including pouring the sealant into the cracks, spraying it on with a wand, or using a specially designed machine to inject the sealant into the cracks. The type of sealant used will depend on the severity of the cracks and other factors.

After the sealant is applied, it needs time to cure and harden. This typically takes a few hours to a day or more, depending on the temperature and humidity conditions.

Asphalt cracks can be caused by various factors, including weathering, aging, heavy traffic, freeze-thaw cycles, poor installation, and the natural settling of the ground.

The next step is to prepare the cracks for sealing. This may involve cleaning the cracks with high-pressure air or water, removing any debris or vegetation from the cracks, and applying Cracks in asphalt pavement can lead to water infiltration, further deterioration, and the eventual need for costly repairs. Timely crack repair helps prevent more extensive damage.a primer or other preparation material to ensure that the sealant will adhere properly.

Common types of cracks include longitudinal cracks (running parallel to the pavement’s centerline), transverse cracks (perpendicular to the centerline), alligator or fatigue cracks (resembling alligator skin), and block cracks (forming rectangular patterns).

Small cracks can often be repaired by homeowners using DIY kits. However, for larger or complex cracks, it’s advisable to hire a professional asphalt contractor to ensure proper repairs and long-lasting results.

Ideally, crack repairs should be done during warm, dry weather to ensure proper adhesion of repair materials. Spring and summer are usually good seasons for crack repair.

Crack repair typically involves cleaning the crack, applying a crack filler or sealant, smoothing it out, and allowing it to cure. The specific steps may vary based on the type of crack and the chosen repair method.

Crack sealing involves using specialized materials to seal cracks and prevent water infiltration, while crack filling involves filling the cracks with a suitable material to prevent them from expanding. Both methods are used based on the type and severity of cracks.

The durability of crack repairs depends on factors such as the quality of materials used, the skill of the repair work, and the amount of traffic the pavement receives. Properly done repairs can last several years.

While it’s not possible to entirely prevent cracks, proper installation, regular maintenance (including sealcoating), and managing water drainage can significantly prolong the lifespan of your asphalt pavement and minimize crack formation.

In most cases, repaired areas can be opened to traffic shortly after the repair is completed. However, it’s best to follow the manufacturer’s recommendations for curing times to ensure the longevity of the repair.

The cost of crack repair varies depending on factors like the extent of damage, the type of crack, the repair method used, and the local labor and material costs. It’s best to obtain quotes from reputable contractors for accurate pricing.

Depending on your insurance policy and the cause of the damage, crack repair might be covered. It’s a good idea to contact your insurance provider to understand your coverage options.